Details
Lynx Heli Innovations introduce high quality fiber glass, hands air-brushed canopy.
180CFX have now with Lynx multiple canopy profile shape and for your fully enjoyment for each canopy shape we will made many paint design.
Our intent is made your 180CFX look different but also fly great with a low weight canopy.
Special paint and fiber glass cure process assure the best look canopy you ever looking with a superior shock resistance and an acceptable weight.
So the next time you want to upgrade your helicopter look – think Lynx Canopy!
FEATURES:
- Direct replacement for 180CFX canopy.
- Separated body, easy to replace battery
- Newest canopy profile design and multiple options per profile design and paint color.
- Automotive Quality paints and clear coats.
- Professional air-brushed and finish quality
- Incredible rapport quality / cost
TECHNICAL SPECIFICATION:
- Canopy base made by High quality Fiber Glass
- An allergic and safe Automotive Quality paints and clear coats.
- Weight: 23gr (Canopy + Boom)
PACKING LIST:
1 x 180CFX Fiber Glass air brush Canopy
1 x 180CFX Fiber Glass air brush Boom
1 x 180CFX Vertical Fin
INSTALLATION GUIDE:
- Remove the tail gear box, tail boom clamp, and tail push rod guide set
- Remove the plastic ball link from the tail push rod. Put this aside for re-installation later. We suggest you to count the number of turns to remove so it can be later re-installed in the same position
STEP1:
- Install the Lynx tail Boom by sliding it forward over the stock boom. Be sure the metal guide push rod goes through the two carbon tail push rod guides on the Lynx tail Boom
- Remove two screws on both side of the frame
- Push the frame out to create a slot between the frame and the front boom mount so u can able to slide the tail Boom inside the slot
STEP2:
- Secure the Lynx tail Boom by tighten up the two screws
- Re-install the plastic ball link to the tail push rod. Return the rod to its original length by twisting the ball link and counting the same number of turns as when you removed it . Recheck your tail servo endpoint as necessary
- Re-install the tail gear box and secure using the Lynx Vertical Fin (Not standard or any upgrade vertical fin).
Additional Information
| Manufacturers | LYNX |
|---|
