Details
- -This outrunner motor is mainly designed for Blade MCPX BL or similar size heli, running with 7.4V Lipo batteries.
- - You will also need to get the carbon chassis too, in order to fit this motor. Because the stock chassis does not have enought space to fit this motor.
Motor Kv: | 8200 RPM / Volt (KV) |
No-Load Current (Io): | 0.7 Amps @ 7.4V |
Max Continuous Current: | 7 Amps |
Weight: | 10 grams |
Diameter: | 14 mm |
Length: | 18 mm |
Shaft Diameter: | 1.0 mm |
Shaft Length:: | 7 mm |
Distance Between Holes | 8.5 or 8.0 mm , M1.4 screw |
Max Lipo Cell: | 2 Cell (7.4V) |
** For maximum life, please ensure that the bearings are maintained properly; put a small drop of bearing oil on each bearing every 5 flights. And please make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding and causing over load to the motor.
Additional Information
Manufacturers | XTREME |
---|