600mW 5.8GHz A/V Tx

One of the most popular A/V transmitters in the FPV hobby. An efficient, lightweight (heatsink and fan-free) transmitter, which packs quite a punch.

Stay Legal…

Many A/V transmitters sold for FPV use have channels which fall outside of the legal bands (ISM, and Amateur Radio). The channel set used ImmersionRC and FatShark all fall within the legal bands, and will not raise the eyebrows of the authorities.

Note that a license may be required to operate this transmitter in certain countries.

 600mW (27.5dBm, +/- 1dBm) of clean output power

 SMA Antenna connector, with supplied 5.8GHz Rubber-duck antenna

Frequencies: 5740, 5760, 5780, 5800, 5820, 5840, 5860MHz

 All Frequencies within legal bands (ISM + Ham Radio)

Not affected by 2.4GHz R/C radios!

 May require a license to operate

Plug and Play

The 600mW transmitter includes a built-in super-quiet switching regulator, which powers not only the transmitter, but a connected 5v camera. No need for external step-down supplies, and no need for filtering, or a second battery. Run the 600mW directly from your flight pack!

Supplied connectors are standard for all ImmersionRC/FatShark equipment, including cameras, and OSDs. Plug and Play Fly!

Full FatShark Compatibility

The ImmersionRC 600mW 5.8GHz Tx was designed for full compatibility with all 5.8GHz FatShark FPV Goggles.

The Attitude series include built-in 5.8GHz receivers, with the same channels as the 600mW Tx.

The Dominator series, with swappable RF modules, support the same channels with the ‘5G8 Alpha’ RF module.

Circular Polarization Upgrade

The 25mW 5.8GHz Tx is shipped with standard ‘rubber-duck’ style linearly-polarized antennas. Upgrade to circular-polarized antennas to increase usable range, especially in urban environments.

The SpiroNET Omnis, quite possibly the most popular CP antenna in the FPV world, are just the ticket.

5.8GHz RF loves to reflect off of surfaces (walls, the street, or a passing UPS truck), Circular Polarization ensures that the reflection is spinning the opposite way, and is does not create a ‘null’ at the receiver.

Extreme Range, CE-Legal Power

Install a SpiroNET 13dBi patch on the receiver to dramatically increase usable range. Even a 25mW 5.8GHz Tx can be used several km out when pointing a patch antenna at the model.

Install the patch on an antenna tracker for even better performance, ensuring that the directional patch is always pointing in the direction of the model.

PRODUCT SPECIFICATIONS

Retail Price ($USD): $69.00

Power Output: 28dBm (600mW)

RF Impedance: 50 ohms

Frequency, Band 1: 5740, 5760, 5780, 5800, 5820, 5840, 5860MHz

Audio: Stereo, Subcarriers on 6.0, and 6.5MHz

Modulation: FM, Audio and Video

Length: 50mm

Width: 23mm

Height: 15mm

Weight: 18g

Power Requirements: 2s-6s LiPo (6v – 25v)

Power Consumption: 3W

Notice: The use and operation of this product in the USA and many other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them.  Empire Hobby, LLC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.